An Overview of the Process and Importance of Rain Gutter Installation in Puyallup Wa

by | Dec 17, 2019 | gutters

Top Stories

Categories

Archives

A residential roof drainage system consists primarily of troughs commonly called rain gutters. Downspouts allow rainwater to flow from the troughs and away from the building. The devices are held in place by hangers or other hardware. During Gutter Installation in Puyallup Wa, downspouts are placed strategically for the most effective dispersal of water. Extensions are common components to divert water even further away.

Gutter Placement

Rain Gutter Installation in Puyallup Wa is done two or three inches below the roofline and not right against it or above it. This way, rainwater easily flows down the roof slope and into the gutter. There is no risk of it backing up under shingles if the gutter becomes filled as rain pours down. The slight downward angle of the troughs forces water to move to the downspouts.

Maintenance

Once the equipment is in place, it usually does not need any servicing except for routine clearing away of accumulated debris. Mesh screens can be added to the tops of downspouts to prevent leaves and other debris from getting inside and building a clog. It’s important to remove leaves, seeds, nuts and pine cones often enough so that water does not become trapped in the troughs and spill over the side during heavy rain. When the gutters are clear, water may shoot from downspouts almost like a fire hose if the rainfall is dramatic enough.

Guards

Gutter guards can be installed on top of the troughs if debris tends to be a problem and the household residents don’t like cleaning out the devices. The guards come in different styles and serve to block leaves and other material that falls from trees.

Concluding Thoughts

Without gutter installation, serious damage can occur to a home as rainwater pours down the side of the house and onto the foundation. The fascia and trim can begin rotting away due to all the excess moisture. Water-logged soil next to the building can cause egress windows to leak from the high pressure. It can cause a basement wall to begin cracking or bulging inward. That wall may even collapse. Rain gutters can prevent all of these problems.