Creating a cool living area can require large amounts of energy and there are various ways to handle this task. The most common tools for the job are mechanical air conditioners, but alternatives such as the heat pump are available. The AC functions by compressing a chemical refrigerant and this condensation results in a state change that allows it to collect heat. After the refrigerant is compressed, it is cycled through the evaporator coil and chills the metal the coil is made from. Unfortunately, the AC generates condensation that mixes with the dust in the environment. This can cause a blockage that freezes on the coil and ruptures it. Repairing this problem requires an expert in residential air conditioning in Bradenton FL.
The AC is a complex piece of equipment that can fail for a variety of reasons. Some of these include faulty circuits and sensing switches. Another is the dryer. The function of the dryer is to keep moisture out of the condenser. Moisture in the system can cause the condenser to lock up or begin to corrode. This is the most expensive component on most air conditioners so caring for it is essential. Another way to protect the condenser is keeping the refrigerant level properly set. Condensers require lubrication just like any other piece of equipment that deals with heat. Unfortunately, there is no way for the user to add or check the lubricant level. Instead, they need to have a reliable Residential Air Conditioning in Bradenton FL service the system. One reason that this is required is that the refrigerant carries the chemicals necessary to lubricate the condenser.
Servicing the AC involves more than checking the refrigerant level. Air conditioners have a lot of electronics and they are subject to failure from heat buildup and extensive use. The only way to avoid heat on the electronic components is to keep them clean, but dust is a common issue with any appliance that moves air. Annual cleaning can help remove the dirt so the system functions better. Another area that needs an occasional cleaning is the evaporator coil. Dust and moisture build up over time and inhibit thermal transfer. A technician can remove the coil and clean it in an acid bath to remove this residue. Click here to learn more about air conditioners and their maintenance.
