Overhead doors come in handy in a number of settings. Along with the use in commercial facilities like warehouses and factories, they can also be the ideal solution for a residential garage. In all these settings, the time will come when some sort of repair is needed to keep the Overhead Door in St Louis MO working properly. Here are a few signs that such a day has arrived.
The Door Sticks
The Overhead Door in St Louis MO will roll upward to a certain point, and then it seems to stick. While a good push upward will free the door and allow it to move to a completely open position, having to do that every time gets a little old. Chances are that the reason the door sticks has to do with the rollers, the rails, or a warped panel. Having a professional check the door will reveal the underlying cause, and make it possible to eliminate the problem.
Lots of Noises
While the door has always made a little noise going up and down the rails, it seems to be worse lately. In fact, the sound is sometimes similar to that of a cat in distress. The problem could be that one or more of the rollers have sustained some damage and need replacing. Perhaps it is time to use some sort of lubricant or treatment on the rails. A quick check by a professional will make it easier to know what needs to be done and get rid of that unusual noise.
A Big Dent
While no one in the household seems to know what happened, a big dent has appeared in the middle of the overhead door. Along with looking unsightly, that dent also makes it harder to open and close the door. Rather than focusing on finding out what happened, go ahead and call a professional. Depending on the severity of the damage, it may be possible to remove the dent and get a few more years of use from the door.
For more tips on how to know when an overhead door needs professional attention, visit the website and learn more about the process of upkeep and maintenance. If something is not quite right, call for help today. Doing so will extend the life of the door and make it much easier to use.