Mold is one of the scariest items uncovered during a home renovation project. This is because mold often grows behind walls that have a constant source of moisture. Once mold establishes itself, it can cover a lot of area very quickly. Because it is a health hazard, large areas of mold should only be removed by experts. This is the general process on how the mold is removed from your home.
First, an inspection must be completed to identify all of the areas that need Mold Removal in Salinas CA. If the discovery is in the bathroom, adjacent rooms will be inspected to see if the mold has spread throughout the walls. Sections of drywall may have to be removed as part of the inspection to determine the overall extent of the infestation. All suspected areas where water piping flows may also be inspected, especially if there is evidence of a leakage in the plumbing.
Once the mold inspection has identified the areas, the rooms are isolated. Barriers are established to prevent the mold spores from escaping during the remediation process. Negative air pressure and filters are added for purification purposes. All personnel working in the area will don protective gear as well as air respirators to protect them while work is in progress.
As part of the mold removal in Salinas CA, process, the materials with the mold are packaged in hazardous materials bags. The bags in the room are placed in another bag in the decontamination area to ensure that no mold spores can escape. The bags are marked as a bio-hazard. They are transported to a waste station that specializes in accepting hazardous wastes. The protective gear is also packed up in these bags.
After all the mold has been removed, the air is tested for the presence of any remaining mold spores. If the testing reveals a higher number than the average for the outdoors, further investigation for areas of mold have to be done. If the testing results in the average number for the outdoors, the home is clean of mold and repair work on the area can safely proceed.
