It’s time to check your tires, and you get a shock. One of the tires has a nail or screw embedded in the tread. This is a common occurrence, and it often happens in hot weather when tires are a little softer than normal. But what is the proper thing to do when you see something in your tires? And what can you do if you can’t get to a tire repair service in Fort Worth today? Here are some tips that can help you make the right decision.
Don’t Remove the Obstruction
You may be tempted to get a pair of pliers and pull out the nail, but this is never a good thing to do. When nails enter tires, the rubber forms a seal around the nail, and this limits air loss. You may have a slow leak with a nail in the tire, but when you pull it out, you could be dealing with a flat tire almost immediately.
It May Not Be So Bad
Not all screws or nails are long enough to cause you problems. It’s possible that the obstruction is short and didn’t puncture all the way through. However, you won’t know this until you take it to your tire repair service in Fort Worth.
Don’t Use Flat Repair Products Unless You Have to
Flat repairs in a can are only temporary fixes. If you can drive the car to your tire repair service in Fort Worth, it’s best not to use these products. They create a big mess, and your tire technician may have to charge extra for clean up services.
Listen to Your Tire Technician
A reputable tire repair service in Fort Worth has your best interests at heart. Many flats can easily be fixed. However, in some cases, the tire may need to be replaced.
