A seal coat is a pavement sealer which is a mixture of a liquid coating applied to a pavement that is asphalt based. One of its uses is in constructing roads. In this case, asphalt mixed with water is sprayed on the surface of the road. The next step is spraying gravel over the surface, and then the seal coated surface has to have a finishing by sweeping it to remove any gravel that is loose.
Sealcoating in Burlington VT is always necessary especially if one needs to prolong the lifespan of the asphalt. On the roads, seal coating is required to avoid the emergence of potholes. It is a sure way to protect the road. Recommendations are that seal coating on the road should be done after 1-3years depending on the state of the road.
Many people ask when it is advisable to seal coat especially after the construction of asphalt. Truth is the new asphalt takes around 1-2 months to cure. After that, a seal coat can be applied since there will be no oils present. Avoid Sealcoating in Burlington VT during the rainy season. The coating dries up in 24hrs, and advice to people is that they should not use the pavement until a day is over to avoid any cracks.
Sealcoating is done through the use of a brush or some different specialized spray equipment. One key component in the mixture of the sealant is sand. It has to be present to help in the drying process and enhance the durability of the asphalt.
A wide range of firms offers paving services for both commercial and residential use. Such companies offer solutions to constructing asphalt and seal coating to ensure durability. Such companies include Rox Asphalt LLC which provides additional services like repairs of pavements and driveways.
Sealcoating has found its way to providing a solution for increasing the life span of asphalt. It avoids wear and tear and ensures that the physical appearance remains new. Road materials are quite expensive, and maintenance is on the higher side. However, seal coating has provided a solution to avoid the costs involved in the repairs of asphalt. Additionally, it ensures that water does not find its way inside to do more damage. It is a sure way to cut down future costs associated with having to construct asphalt entirely.
